Email : tuolima@tuolima.com

NEWS AND EVENTS

Home / News / How to operate the fiber optic splicing machine?

How to operate the fiber optic splicing machine?

Views: 3     Author: Site Editor     Publish Time: 2022-01-27      Origin: Site

The basic operation when using TUOLIMA fusion splicer:

Step 1: Battery supply operation: using the polymer lithium battery in the splicer to separately supply for the fusion splicer.

 

Step 2: Turn on the splicing machine: Press the button on the operator panel until the LED indicator lights turn from green to red, release the button.

 

Step 3: Cover fiber protection sleeve: Put the fiber through the fiber protection sleeve.

 

Step 4: Preparation of fiber end-face: Use fiber stripper to strip the fiber coating layer, the length is 30-40mm. Then use the alcohol wiper to wipe clean the fiber.Finally use the fiber cleaver to cut the bare fiber and get the clean fiber end-face.

 

Step 5: Place fiber: Put the bare fiber end-face in the V-shaped groove; ensure the tip of the fiber between the tip of the electrode and V-shaped groove’s edge.

 

Step 6: Turn off the splicing machine: Press the button on the operator panel until the LED indicator lights turn from red to green, now the machine is turned off.

Quick Links

Products

Contact Us Now

Address: Room 1507/1513, Qianjiang Science and Technology Building,
No. 388 Wensan Road, Xihu District, Hangzhou City 310000, Zhejiang Province, China
Web:www.tuolima.com
Tel: +86-0571-28339001
E-mail:tuolima@tuolima.com