Email :


Home / News / How to use HC tension cable clamp?

How to use HC tension cable clamp?

Views: 0     Author: Site Editor     Publish Time: 2022-03-16      Origin: Site

Fiber Optic Cable Clamp is used together with the fiber optical cable, such as the drop cable and outdoor cable. HC tension cable clamp, one type of the fiber optic cable fitting, is used commonly with ADSS cable and it is very cost-effective. Some of our customers might  not know clearly about the usage procedure of HC tension cable clamp, following will give you more directions:


Step 1: Remove the neoprene sleeves; unwind the cable in the J-cradles; tension the cable between the end posts;


Step 2: Lift the cable to remove it from the J-cradles. Place the neoprene sleeve around the cable at the J to protect it from premature wear due to friction in the J or to vibrations of wind power;


Step 3: Replace the cable and the sleeve in the J-cradle;


Step 4: Replace the head of the screw at the back of  the cradle and tighten the nut using a 13mm socket wrench until the two levers of the sleeve are in contact.


After following above 4 steps, now you could use the HC tension cable clamp very well!

Quick Links


Contact Us Now

Address: Room 1507/1513, Qianjiang Science and Technology Building,
No. 388 Wensan Road, Xihu District, Hangzhou City 310000, Zhejiang Province, China
Tel: +86-0571-28339001