Views: 2 Author: Site Editor Publish Time: 2022-01-13 Origin: Site
The assembly method of fiber optic fast connection:
1.Take out the tail sleeve and put it into optical cable;
2.Strip the outer sheath of the optical cable and keep the covering layer (the length is 50mm);
3.Use fiber optic stripper strip the fiber coating;
4.Remove impurities with alcohol;
5.Cut fiber optical;
6.The optical fiber penetrates from the tail of the fiber fast connector, causing the optical fiber to bend;
7.Using an optical fiber end cap clamping;
8.Move the switch up to the top;
9.Put on the shell cover protective sleeve of fiber fast connector, the assembly is complete.
Notice: please assure the fiber quick connector and fiber are clean during these procedures.