Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable. Fiber Optic cable is produced according to IEC60794-1-1 standards, while referring to GB/T7424.1-98 standards. Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential winning. With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.
Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable. Fiber Optic cable is produced according to IEC60794-1-1 standards, while referring to GB/T7424.1-98 standards. Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential winning. With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.
Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable. Fiber Optic cable is produced according to IEC60794-1-1 standards, while referring to GB/T7424.1-98 standards. Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential winning. With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.
Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable. Fiber Optic cable is produced according to IEC60794-1-1 standards, while referring to GB/T7424.1-98 standards. Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential winning. With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.
Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable. Fiber Optic cable is produced according to IEC60794-1-1 standards, while referring to GB/T7424.1-98 standards. Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential winning. With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.
Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable. Fiber Optic cable is produced according to IEC60794-1-1 standards, while referring to GB/T7424.1-98 standards. Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential winning. With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.
The optical fiber unit is positioned in the center. Two parallel fiber reinforced plastics (KFRP) are placed at two sides. A steel wire as the additional strength member is also applied. Then the cable is completed with black LSZH sheath.
The optical fiber unit is positioned in the center. Two parallel fiber reinforced plastics (KFRP) are placed at two sides. A steel wire as the additional strength member is also applied. Then the cable is completed with black LSZH sheath.
The optical fiber unit is positioned in the center. Two parallel steel wire are placed at two sides. A steel wire as the additional strength member is also applied. Then the cable is completed with black LSZH sheath.
The optical fiber unit is positioned in the center. Two parallel steel wire are placed at two sides. Then the cable is completed with black or color LSZH sheath.
Stainless steel material in a shiny finish, offers good resistance to oxidation and many moderate corrosive agents. It can be wildly used in fixing pipes, tubes, cables and other related industries, especially in the environment where high resistance of oxidation is required. All the assemblies passed the tensile tests, operation experience with temperatures ranging from - 60 °C up to +60 °C test, temperature-cycling test.
CA1500 is made of aluminum alloy and permits single or double anchoring. Fixing on poles is ensured by one or two 14 or 16mm diameter bolts with suitable washers or using two 20*0.7mm stainless steel straps.
CA25 is designed for single anchoring whereas the bracket offers up to 6 fixing points. This specific design allows fixing on wooden, metal or concrete poles. It is implemented using a 10mm diameter bolt or using a 20*0.7mm stainless steel strap.
CA1600 is made of aluminum alloy and permits single or double anchoring. Fixing on poles is ensured by one or two 14 or 16mm diameter bolts with suitable washers or using two 20*0.7mm stainless steel straps.
Tension clamp, Use for figure 8 cable, choose the type according to the diameter of messenger and the cable load. Suspension of copper cables. It can be installed using either one traversing bolt or a polebanding fixing kit. The curved grooves improve the cable grip and enable angles up to 25deg.
The suspension clamp D6 consists of a nylon body with an integrant nylon bail and aneoprene sleeve. The clamp is suitable for both round and flat FO cables. Optionally acable tie secures the clamp body.
Suspension clamp,Use for ADSS cable,choose the type according to the diameter of ADSS cable. Hook clamps are designed to provide a suspension for Ø8 to 20mm aerial ADSS cables at intermediate poles on cable routes with angle < 20° on access networks (spans up to 100m). The suspension clamp for ADSS cable consists of a galvanized steel J Hook, A neoprene sleeve and tightening screw. The clamp may be installed on poles using either a pigtail bolt or 2 pole bands.
Ratchet type tool MBT-004 is a way of binding stainless steel banding around different elements securely. It keeps the tension tight on the strapping bands as they fasten the components together. The ratchet style heavy duty forged steel banding tool. Used with up to 25mm width and 1.15mm thickness stainless steel banding. The ratchet type tool is made of galvanized steel, which is resistant to impacts and wear.
FISH series are tension clamps for FTTH drop cable. Fish clamp FTTH, can be used in anchoring, turning, suspension optical fiber cable routes. Without suspension wire (in case of fiber optics diameter is 3.3mm*2.0mm): 2turns. With suspension wire (in case of fiber optics diameter is 5.0mm*2.0mm): 1turn. TUOLIMA offer this tension clamp with appropriate dead-end anchor FTTH ODWAC clamp, S-type, ACC and other FTTH clamps. All the assemblies passed the tensile tests, operation experience with temperatures ranging from – 60 °C up to +60 °C test, temperature-cycling test.
ES1500L bracket is made of aluminum alloy and permits single or double anchoring. Fixing on poles is ensured by one or two 14 or 16mm diameter bolts with suitable washers or using two 20*0.7mm stainless steel straps.