Drop wire clamps, also called flat cable clamps, can be used with telephone drop wire cable, and optical fiber cable in FTTH, FTTX, FTTB solutions. TUOLIMA’s drop wire clamps mostly used in telecommunication.
Drop tension clamp is equipped with stainless steel perforated shim, which increase the tension load on stainless steel clamp.
The stainless steel bail allows installations of ODWAC FTTH clamps on the buildings, poles, strand with drive hooks, pole brackets, SS hooks, FTTH brackets and other drop wire fittings and hardware. That can be supplied either separately or together as assembly with FTTH clamps.
Hardware fiber drop clamp stainless steel and drop wire mounting fittings are available in TUOLIMA’s product range. Optical fiber drop wire clamps are easily to be pick up according to mechanical resistance and diameter of cables’ wire of messenger.
Drop wire anchoring clamps can be installed on dead-end, double dead-ending network cable routes.
Fiber optic drop cable clamps design allows withstand a sufficient load without cable slip and damage.
Stainless steel materials guarantee long time of usage. Full stainless steel or plastic shims are available.
Jera is able to produce this ODWAC, telecommunication clamp from metal and aluminum, upon the request from customer. We also have appropriate for ODWAC, FTTH pole accessories.
Drop clamps and optical fiber cable brackets are available either separately or together as assembly.
All the assemblies passed the tensile tests, operation experience with temperatures ranging from – 60 °C up to +60 °C test, temperature cycling test, aging test, corrosion resistance test etc.
Materials: stainless steel or aluminum drop wire clamp’s body and wire bail
For installation put an aerial drop wire cable in clamp’s shell. Place a part of tension clamp on top of optical fiber or telephone cable with raised embossing, against cable. Insert wedge in shell. Install the bail wire on drop wire hook and fixate in shell.