Related Pages

• ODN(Optical Distribution Network)
  ODN(Optical Distribution Network) the physical fibre and optical devices that distribute signals to users in a FTTx network. 1xN PLC splitter, SMF-28e 0.25mm bare fiber, stainless steel body and box (dimension depends the mode), 1260~1650nm, pigtail and adap...
• ONU421
  Optical Network Unit ONU421, 4 RJ45 ports, 2 VoIP ports, 1 RF port (75ohm, F type connector for CATV), 1 optical port for GEPON, SM, single  fiber, 20km, 10/100Base-T, max split: 32, wavelength, 1490R/1310T, CLI management, external power, AC100~240V/DC-12V(...
• TA860-R
  House CATV amplifier, forward path, 2-output, 47/87-862MHz, Chinese amplifier module, gain 30dB, variable EQ (18dB) and ATT (15dB), 102dBuV; return path, 5-30/65MHz, gain 15dB, variable ATT (10dB), 110dBuV, imperial F type female port, AC160~250V (power cord w...
• TA860
  House CATV amplifier, forward path, 2-output, 45-862MHz, Chinese amplifier module, gain 30dB, variable EQ (18dB) and ATT (15dB), 102dBuV, imperial F type female port, AC160~250V (power cord with flat EURO plug (2 pole) or 30~60V....
• TA-200
  House CATV amplifier, forward path, transistor amplifying, 2-output, 20dB, variable ATT, 108dBuV, 220V, flat EURO plug (2 pole)....
• TI-220
  House CATV amplifier, forward path, transistor amplifying, 2-output, 40-400MHz,22dB (VHF), 470-862MHz,24dB (UHF), variable ATT 16dB VHF,12dB UHF, 102dBuV, 220V, flat EURO plug (2 pole)....
• AT860
  Trunk CATV amplifier, 2-output, 47/87-862MHz, PHILIPS amplifier module, fixed plug-in or variable ATT (20dB) and EQ (18dB), output level 106 dBuV, gain 34dB, imperial F type female port, outdoor waterproof housing, AC135~250V (power cord with EURO (2 pole with...
• AT860-AGC
  Trunk CATV amplifier, 2-output, 47/87-862MHz, PHILIPS amplifier module, fixed plug-in or variable ATT (20dB) and EQ (18dB) , output level 106 dBuV, gain 34dB, AGC, pilot frequency 168.25MHz, imperial F type female port, outdoor waterproof housing, AC135~250V (...
• T2115
  Signal level meter, frequency range 5-870MHz, level range 30~120dBuV, 128*64 matrix LCD display, scan mode, channel test and spectrum test, built-in speaker, can connect printer, input impedance 75 ohm(BNC or F type connector), AC and DC Ni-MH rechargeable bat...
• T2110
  Signal level meter, frequency range 46-870MHz, level range 30~120dBuV, 128*64 matrix LCD display, scan mode, channel test and spectrum test, built-in speaker, can connect printer, input impedance 75 ohm (BNC or F type connector), AC and DC Ni-MH rechargeable b...
• T1125
  Signal level meter, frequency range 5-870MHz, level range 30~120dBuV, TN big character LCD display, 2 channels test at same time, built-in speaker, can connect printer, input impedance 75 ohm (BNC or F type connector), AC and DC Ni-MH rechargeable battery powe...
• TA8030(C2)
  FTTH optical receiver, 2-port output, E-O pin diode, Chinese GaAs amplifier module, 45-862MHz, variable ATT and EQ (15dB), imperial F type female port, FC/APC or SC/APC connector, rated output level 98dBuV (input optical power -2dBm), AC160~250V (power cord wi...
• TA8030(C1)
  FTTH optical receiver, 2-port output, E-O pin diode, Chinese amplifier module, 45-862MHz, variable ATT and EQ (15dB), imperial F type female port, FC/APC or SC/APC connector, rated output level 98dBuV (input optical power -2dBm), AC160~250V (power cord with fl...
• TA8330-R(1mW)
  Optical receiver, 4-port output, PHILIPS optical receiving module BGO807, PHILIPS amplifier module, 87-862MHz, rated output level 94dBuV(input optical power -2dBm); return path frequency 5-65MHz, return path transmitter 1mW, diplex filter 65/87 (other freq. sp...
• Optical Fiber Identifier
  Optical fiber identifier, portable, designed to detect optical signals without disrupting traffic, suitable for 0.25, 0.9 and 3.0mm jacketed fiber....
• Optical Power Meter
  Optical power meter, 800~1600nm, 60dB dynamic range, compact and slim hand-held power meter which up-to-date IC are integrated in....
• Optical Light Source
  Optical light source, dual wavelength, 1310/1550nm, output -5dBm, operates in either continuous wave (CW) mode or 2kHz modulated mode....
• Optical Variable Attenuator
  Optical variable attenuator, adaptor type, 0.5~30 dB attenuation, 1310 & 1550nm, dual window, FC/PC....
• Optical In-line Attenuator
  Optical in-line attenuator, 1310 or 1550nm, 1310 & 1550nm, single window and dual window, in-line and flange type are available....
• Optical Adaptor Type Attenuator
  Optical adaptor attenuator, 1310 or 1550nm, single window, adaptor type, FC/PC, SC/PC and ST/PC are available....
• 1xN Optical Coupler 19
  1xN optical coupler, SM, 9/125um, tree structure, single window or dual window, broadband type, 19" 1U framework, adaptor type or according to customer's requirements, SC/APC or FC/APC adaptor, split ratio is specified....
• 1xN Optical Coupler
  1xN optical coupler, SM, 9/125um, tree structure, single window or dual window, standard or broadband type, plastic box (dimension depends on the model), Φ3mm (PVC), 1m or according to customer's requirements, SC/APC or FC/APC connector, split ratio is specif...
• 1x3 Optical Coupler
  1xN optical coupler, SM, 9/125um, tree/star structure, single window or dual window, standard or broadband type, plastic box (dimension depends on the model), Φ3mm (PVC), 1m or according to customer's requirements, SC/APC or FC/APC connector, split ratio is s...
• Optical Receiver with RP
  Optical receiver with return path, 2- or 4-port output, 5-200MHz, E-O or ORTEL PD, low noise transistor, AC220V or DC48V, 19" 1U standard framework....
• FTTH Optical Receiver
  Mini optical receiver for Fiber-To-The-Home (FTTH) applications, 1- or 2-port output, E-O pin diode, Chinese or PHILIPS hybrid amplifier module....
• Indoor Optical Receiver
  Indoor optical receiver, 2-port output, WTD optical receiving module, PHILIPS amplifier module 45-862MHz, reverse upgrade, 106dBuV, AC220V, 19" standard framework....
• Outdoor Optical Receiver
  Outdoor optical receiver with 2- or 4-port output, E-O pin diode, PHOTON and PHILIPS optical receiving modules are available. Return path is reserved. Waterproof and RF screened die casting house, local or remote power supply....
• Optical Receiver
  Fiber optic receivers are instruments that convert light into electrical signals. Sometimes they are also called optical nodes. They contain a photo diode semiconductor, signal conditioning circuitry, and an amplifier. Fiber optic receivers use three types of ...
• WDM
  Wavelength Division Multiplexers (WDM) are passive devices that combine light signals with different wavelengths, coming from different fibers, onto a single fiber. They include dense wavelength division multiplexers (DWDM), devices that use optical (analog) m...
• Optical Attenuator
  Fiber optic attenuators are devices that reduce signal power in fiber optic links by inducing a fixed or variable loss. They are used to control the power level of optical signals at the outputs of light sources and electrical-to-optical (E/O) converters. They...
• OLT (Optical Line Termination)
  Provides a direct optical interface to the core Ethernet/IP network/CATV, provide uplink port, downlink port and management port, compliant to the IEEE802.3ah standard....
• Optical Active Series
  ...